![]() ![]() ![]() A wider one for the black cartridge and a shorter one for the color cartridge. The ink system package should include special devices for filling the cartridges. Remove the binder clip and open the vents on the ink tanks. When you get the cartridges ready, they are filled with ink to the top, every color taking about 2 or 3 ml and about 10 ml for the black cartridge. The next stage is to prepare the cartridges and fill the tubes and the cartridges with ink, as the cartridges themselves have very little ink inside, which is meant exclusively for testing the printer that they come supplied with. In the color cartridge, cover the vent hole, under which one of the connectors is plugged. ![]() ![]() In the black cartridge, tighten the hole with cotton wool, and then put some glue on it. Theoretically, all sealing rubbers should be leak-proof, but if there’s a problem, you can always fix it with a small piece of cotton wool and a bit of super glue. This approach means that ink will not spill over the print head and that you will never run out of ink while printing. The main purpose of the system is to ensure continuous ink flow from the tanks to the print heads. The continuous ink supply system includes ink tanks, ink cartridges, and a set of flexible tubes that are used to connect the tanks and the cartridges. It means the air can’t possibly get into the print head, so it can’t dry up, and it will work longer! How the continuous ink supply system works When you have to refill the ink tanks, you don’t need to open the printer cover. In fact, the ink supply system is placed next to the printer, and a set of flexible tubes is used to connect the printer and the system. When replacing an original cartridge, you have to open the printer’s cover and the print head comes into contact with air inevitably, which is very undesirable – the print head can dry up! If it happens, you will have to buy a new print head which costs almost half the price of a new printer! Also, using a continuous ink supply system helps to extend your printer’s life cycle. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |